Eliminate pet and food odors by removing the source

Next-generation Bio-Oxide Pet Pro permanently eliminates disgusting organic bacteria and food sources that cause odors. Unlike bleach, disinfectants and most “odor removal products,” its non-hazardous ingredients bond with odor molecules, destroying pet urine, feces, vomit, milk product odors in as little as 4 hours.

Occasionally serious pet odors like male cat urine are treated much easier by adding Bio-Oxide Boost to the Bio-Oxide Pet Pro.

For smoke and food smells use Bio-Oxide Smoke

Pet Pro Odor Eliminator is:

  • 100% biodegradable

  • 100% non-hazardous

  • Safe to use around pets

  • Environmentally safe

  • No harmful by-products

  • Non-toxic

  • Non- staining

  • Non-flammable

  • Neutral pH

  • Safe on fabrics

  • One-step spray application

  • No wait dry time

  • Zero clean-up time

  • Leaves no residue

  • Penetrates wood and concrete subfloors

What is YOUR time worth?

Quickly and permanently eliminate urine and pet odors
from subfloors without priming!

15 Minutes
with Pet Pro Odor Eliminator

  • Permanently eliminates existing odors within hours
  • Install new flooring immediately after treatment = NO Delays
  • Simple to mix, apply and clean up
  • Easily spray under baseboards and tack strip
  • Flooring manufactures warranty honored for full spread adhesives
  • Leaves a fresh clean scent
  • Significant cost savings

5 Hours of
painting, priming, and sealing

  • Existing odors a very likely to return
  • Dry time delays reduce profits, multiple site visits may be needed
  • Messy time-consuming application and clean up
  • Impossible to paint under baseboards and tack strip
  • Flooring manufactures warranty may be voided for full spread adhesives
  • Obvious chemical odor residue
  • Materials are much more costly

Application is Only 5 Simple Steps

STEP 1

Set the sprayer tip to a fan pattern. Saturate all stained areas.

STEP 2

Set the sprayer tip to a pencil point pattern. Saturate the perimeter of the room, spray under baseboards and tack strips.

STEP 3

Set the sprayer tip to a fan pattern. Saturate the entire subfloor.

STEP 4

Set the sprayer tip to a fan pattern. Spray the perimeter including baseboards and walls if necessary.

STEP 5

Set thermostat fan to run. Set sprayer tip to a fine mist. Spray into each intake vent for 10 seconds.

Flooring may be installed immediately after treatment is complete.

WHERE TO USE

Ideal for use on water-safe floors and walls, including wood, concrete, gypsum.

RECOMMENDED PREPARATION

Vacuum or sweep floor. Test an inconspicuous area before application on walls to ensure finishes are water safe.

DO NOT DILUTE

Ready to use. DO NOT DILUTE. 600 to 800 s/f coverage per gallon.

Download Product Data Sheet

Download Safety Data Sheet

Discover The Future

Eliminate pet and food odors by removing the source!!!

Contact Us